Empty

Advanced Test and Measurement
Instruments and Power Supplies

Rohde and Schwarz ZNH Series

Images for illustrative purposes only. Please refer to product details. Click on the main image for a larger view and to see image descriptions.

The ZNH is a full two-port handheld vector network analyzer (VNA) that offers one-port cable and antenna measurement and full two-port S-parameter measurements. The touch based interface simplifies operation and a configuration overview menu makes measurement preparation more efficient.

  • Frequency range from 30 kHz to 4/8/18/26.5 GHz
  • One-port cable and antenna measurement with basic instrument
  • S-parameter (S11, S12, S21, S22) measurement with basic instrument
  • 100 dB (typ.) dynamic range for filter and antenna isolation measurements
  • Factory calibration over entire frequency range
  • Built-in receiver step attenuator to increase port input power range linearity
  • Built-in DC voltage supply (bias) for active components such as amplifiers
  • Easy handling due to low weight (3.1 kg with battery) and well-spaced function keys
  • Fast boot time, non-reflective display, small form factor, ruggedized housing (IP51)
  • 7" colour touchscreen display for intuitive operation with smartphone-like gestures
  • Measurement wizard to speed up measurements and eliminate human error
  • Save measurement results onto an SD memory card or a USB flash drive
  • Easy and cost-efficient upgrades for all options via software keycode
     

Product Variants

There are no available products to list here. Please contact us if you can't find what you're looking for.
No options were found. Sometimes this is because the options list is too extensive and complex to list. Please refer to the data sheet and contact us if you can't find what you're looking for.
Series Model Price
Accessories
NRP67T
Thermal power sensor, 300 nW to 100 mW, 0 Hz to 67 GHz 		POA
Accessories
NRP6A
Average power sensors, 100 pW to 200 mW, 8 kHz to 6 GHz 		POA
Accessories
NRP8S
Three-path diode power sensors, 100 pW to 200 mW, 10 MHz to 8 GHz 		POA
Accessories
NRP90T
Thermal power sensor, 300 nW to 100 mW, 0 Hz to 90 GHz 		POA
Accessories
RAM
Matching pad, 50/75 Ω, L section 		POA
Accessories
RAZ
Matching pad, 50/75 Ω, series resistor 25 Ω 		POA
Accessories
RBU100
Attenuator, 100 W, 30 dB, 50 Ω, type N (f) to type N (m), 0 Hz to 2 GHz 		POA
Accessories
RBU100
Attenuator, 100 W, 30 dB, 50 Ω, type N (f) to type N (m), 0 Hz to 2 GHz 		POA
Accessories
RDL50
Attenuator, 50 W, 20 dB, 50 Ω, type N (f) to type N (m), 0 Hz to 6 GHz 		POA
Accessories
RTH-Z4
Hard shell protective carrying case
£227.76
Accessories
ZV-Z191
Test port cable, type N (m) to type N (m), length: 914 mm, 0 Hz to 18 GHz
£919.80
Accessories
ZV-Z191
Test port cable, type N (m) to type N (m), length: 914 mm, 0 Hz to 18 GHz
£919.80
Accessories
ZV-Z192
Test port cable, type N (m) to 3.5 mm (m), length: 914 mm, 0 Hz to 18 GHz
£1,200.12
Accessories
ZV-Z192
Test port cable, type N (m) to 3.5 mm (m), length: 914 mm, 0 Hz to 18 GHz
£1,200.12
Accessories
ZV-Z195
Test port cable, 2.92 mm (f) to 2.92 mm (m), 0 Hz to 40 GHz (length options available) 		POA
Accessories
ZV-Z195
Test port cable, 2.92 mm (f) to 2.92 mm (m), 0 Hz to 40 GHz (length options available) 		POA
Accessories
ZV-Z93
Test port cable, 3.5 mm (f) to 3.5 mm (m),  0 Hz to 26.5 GHz (length options available) 		POA
Accessories
ZV-Z93
Test port cable, 3.5 mm (f) to 3.5 mm (m),  0 Hz to 26.5 GHz (length options available) 		POA
Accessories
ZV-Z95
Test port cable, 2.92 mm (f) to 2.92 mm (m), 0 Hz to 40 GHz (length options available) 		POA
Accessories
ZV-Z95
Test port cable, 2.92 mm (f) to 2.92 mm (m), 0 Hz to 40 GHz (length options available) 		POA

Pages

This information is based on manufacturer's data, however it should be noted that some accessories may be dependent on additional adaptors or product options, and may be only applicable to certain variants within a product series. Please refer to the manufacturer's data sheets for clarification or contact us for assistance.