ITECH IT8300 Series
DISCONTINUED - Regenerative DC Electronic Load with models from 3.5kW to 73.5kW
This range is discontinued. Please see the IT8000 series instead.
- Voltage range: 80 V / 800 V
- Stand-alone input current up to 3570A
- Stand-alone input power up to 73.5KW
- Support master-slave paralleling, current equalized distribution, maximum output power up to 105 kW or more 1
- Energy-regenerative efficiency Max. 95% 2,3
- 3U size, high power density up to 10.5 kW
- On-grid electricity accumulation function
- Automatic grid-state detection, achieve reliable on-grid function, anti-islanding protection
- 4 testing modes: CC/CV/CR/CP Dynamic loading mode Battery test function, automatic test function, short circuit test function
- Multiple parameters measurement & display: Vdc, Idc, Pdc, Vac, Pac, Fac, Wac
- With pre-charging function, prevent dc loading current overshoot
- Full protection: OVP/OCP/OPP/OTP/ACP and power grid fault protection, fault storage
- Built-in standard LAN/USB/RS232 / RS485 / CAN communication interface, support SCPI protocol
Note 1: Please consult with ITECH for higher power requirement
Note 2: Efficiency up to about 95% for 800V, efficiency up to about 94% for 80V
Note 3: The regenerative power is for in-plant reuse, not for feeding back to the public grid
Product Variants
There are no available products to list here. Please contact us if you can't find what you're looking for.
Data Sheet or Brochure
No options were found. Sometimes this is because the options list is too extensive and complex to list. Please refer to the data sheet and contact us if you can't find what you're looking for.
No results found in this category. For some products this is because accessory list is too extensive and complex to list. Sometimes options are interdependent or mutually exclusive. Please refer to the datasheet or contact us if you can't find what you're looking for.
ITECH IT8300 Series Regenerative DC Electronic Load
